Results for: Croatia
Filters
CMC Quick search Filters close;
?
Added keywords act as an additional filter. Keywords separated by a space will be treated by the logical function AND automatically. You may also use OR. Keyword searches also find close matches. Placing quotation marks (") before and after the search word, e.g. "word", will allow for exact matches.

In case of multiple search, please use ADVANCED SEARCH.
93 results
Reset all
In the CMCs uncertainty statements, the notation Q[a, b] stands for the root-sum-square of the terms between brackets: Q[a, b] = [a 2 + b 2]1/2
Unless otherwise stated the expanded uncertainties given below correspond to k = 2 (at a 95 % level of confidence)
Croatia, DHMZ-SOUL (Meteorological and Hydrological Service/Calibration Laboratory)
Matrix or material Analyte or component Dissemination range of measurement capability Range of certified values in reference materials
Amount of substance fraction in nmol/mol Absolute expanded uncertainty in nmol/mol Amount of substance fraction in
purified air ozone 0 to 1000 1.1 to 2.3E1
  • Uncertainty equation CMC : Q[1.1, 0.023 x (O3)] O3: concentration of ozone in nmol/mol
  • Mechanism for measurement service delivery : Calibration of analysers and calibrators
  • Approved on 22 October 2020
  • Institute service identifier : SOUL-1
  • CMC ID : EURAMET-QM-HR-00000LWD-1
     
Croatia, DZM (State Office for Metrology)
Mass , Mass : 0.1 g to 1 g
Mass standards
Absolute expanded uncertainty : 1.5 µg to 3 µg
Comparison in air
OIML R 111-1
Temperature : 20°C -23°C 
Humidity : 40% -60%
Approved on 25 February 2023
Institute service identifier : DZM-LMG
CMC ID : EURAMET-M-HR-00000O2U-1
 
Mass , Mass : 0.1 kg to 1 kg
Mass standards
Absolute expanded uncertainty : 1.5E1 µg to 1.5E2 µg
Comparison in air
OIML R 111-1
Temperature : 20°C -23°C 
Humidity : 40% -60%
Approved on 25 February 2023
Institute service identifier : DZM-LMG
CMC ID : EURAMET-M-HR-00000O2X-1
 
Mass , Mass : 1 mg to 100 mg
Mass standards
Absolute expanded uncertainty : 0.6 µg to 1.5 µg
Comparison in air
OIML R 111-1
Temperature : 20°C -23°C 
Humidity : 40% -60%
Approved on 25 February 2023
Institute service identifier : DZM-LMG
CMC ID : EURAMET-M-HR-00000O2T-1
 
Mass , Mass : 10 g to 100 g
Mass standards
Absolute expanded uncertainty : 6 µg to 1.5E1 µg
Comparison in air
OIML R 111-1
Temperature : 20°C -23°C 
Humidity : 40% -60%
Approved on 25 February 2023
Institute service identifier : DZM-LMG
CMC ID : EURAMET-M-HR-00000O2W-1
 
Mass , Mass : 1 g to 10 g
Mass standards
Absolute expanded uncertainty : 3 µg to 6 µg
Comparison in air
OIML R 111-1
Temperature : 20°C -23°C 
Humidity : 40% -60%
Approved on 25 February 2023
Institute service identifier : DZM-LMG
CMC ID : EURAMET-M-HR-00000O2V-1
 
Croatia, FER-PEL (FER - Primary Electromagnetic Laboratory)
AC voltage (up to the MHz range) , AC voltage up to 1100 V: meters : 2.20E-4 V to 1100 V
AC voltmeter, multimeter
Relative expanded uncertainty : 7.8E-2 mV/V to 1.2E2 mV/V
{"row_1":{"col_1":"","col_2":"10 Hz to 20 Hz","col_3":"20 Hz to 40 Hz","col_4":"40 Hz to 50 Hz","col_5":"50 Hz to 1 kHz","col_6":"1 kHz to 20 kHz","col_7":"20 kHz to 50 kHz","col_8":"50 kHz to 100 kHz","col_9":"100 kHz to 300 kHz","col_10":"300 kHz to 500 kHz","col_11":"500 kHz to 1 MHz"},"row_2":{"col_1":"up to 2.2 mV","col_2":"550 + 4.5 µV","col_3":"210 + 4.5 µV","col_4":"105 + 4.5 µV","col_5":"105 + 4.5 µV","col_6":"105 + 4.5 µV","col_7":"370 + 4.5 µV","col_8":"850 + 7 µV","col_9":"1100 + 13 µV","col_10":"1700 + 25 µV","col_11":"3400 + 25 µV"},"row_3":{"col_1":"2.2 mV to 22 mV","col_2":"550 + 5 µV","col_3":"210 + 5 µV","col_4":"105 + 5 µV","col_5":"105 + 5 µV","col_6":"105 + 5 µV","col_7":"370 + 5 µV","col_8":"850 + 7 µV","col_9":"1100 + 12 µV","col_10":"1700 + 25 µV","col_11":"3400 + 25 µV"},"row_4":{"col_1":"22 mV to 220 mV","col_2":"550 + 13 µV","col_3":"210 + 8 µV","col_4":"105 + 8 µV","col_5":"105 + 8 µV","col_6":"105 + 8 µV","col_7":"320 + 8 µV","col_8":"850 + 25 µV","col_9":"1100 + 25 µV","col_10":"1700 + 35 µV","col_11":"3400 + 80 µV"},"row_5":{"col_1":"220 mV to 2.2 V","col_2":"500 + 80 µV","col_3":"160 + 25 µV","col_4":"75 + 6 µV","col_5":"75 + 6 µV","col_6":"75 + 6 µV","col_7":"120 + 16 µV","col_8":"250 + 70 µV","col_9":"430 + 130 µV","col_10":"1050 + 350 µV","col_11":"2200 + 850 µV"},"row_6":{"col_1":"2.2 V to 22 V","col_2":"500 + 800 µV","col_3":"160 + 250 µV","col_4":"75 + 60 µV","col_5":"75 + 60 µV","col_6":"75 + 60 µV","col_7":"120 + 160 µV","col_8":"250 + 350 µV","col_9":"500 + 1500 µV","col_10":"1250 + 4300 µV","col_11":"2700 + 8500 µV"},"row_7":{"col_1":"22 V to 220 V","col_2":"500 + 8 mV","col_3":"160 + 2.5 mV","col_4":"80 + 0.8 mV","col_5":"80 + 0.8 mV","col_6":"80 + 0.8 mV","col_7":"220 + 3.5 mV","col_8":"500 + 8 mV","col_9":"-","col_10":"-","col_11":"-"},"row_8":{"col_1":"220 V to 1100 V","col_2":"-","col_3":"-","col_4":"-","col_5":"80 + 3.5 mV","col_6":"-","col_7":"-","col_8":"-","col_9":"-","col_10":"-","col_11":"-"}}
The expanded uncertainties given in this table are expressed in (x*1.E-06*reading + y)
Multifunction calibrator
Frequency : 10 Hz to 1 MHz
Approved on 06 August 2013
Institute service identifier : 5.2
CMC ID : EURAMET-EM-HR-00000D6R-1
 
DC resistance , DC resistance standards and sources: low values : 0.1 mΩ to 1000 mΩ
Fixed resistor
Relative expanded uncertainty : 1 µΩ/Ω to 5.0E1 µΩ/Ω
{"row_1":{"col_1":"","col_2":"Expanded uncertainty / (µΩ/Ω)"},"row_2":{"col_1":"0.1 mΩ to 1 mΩ","col_2":"50 to 12"},"row_3":{"col_1":"1 mΩ to 10 mΩ","col_2":"12 to 3"},"row_4":{"col_1":"10 mΩ to 100 mΩ","col_2":"3 to 1"},"row_5":{"col_1":"0.1 Ω to 1 Ω","col_2":"1"},"row_6":{"col_1":"1 Ω to 10 kΩ","col_2":"1 to 3"},"row_7":{"col_1":"10 kΩ to 100 kΩ","col_2":"3"},"row_8":{"col_1":"0.1 MΩ to 1 MΩ","col_2":"3 to 5"},"row_9":{"col_1":"1 MΩ to 10 MΩ","col_2":"5 to 8"},"row_10":{"col_1":"10 MΩ to 100 MΩ","col_2":"8 to 12"}}
The expanded uncertainties given in this table are expressed in µΩ/Ω
Comparison by means of DVM voltage ratio measurement method
Temperature : 23 °C
Approved on 06 August 2013
Institute service identifier : 2.1
CMC ID : EURAMET-EM-HR-00000D6X-1
 
DC current (up to 100 A) , DC current meters: low values : 10 µA to 100 µA
Multimeter
Relative expanded uncertainty : 1.3E2 µA/A to 8.5E2 µA/A
{"row_1":{"col_1":"","col_2":"Expanded uncertainty"},"row_2":{"col_1":"up to 220 µA","col_2":"50 + 8 nA"},"row_3":{"col_1":"220 µA to 2.2 mA","col_2":"50 + 8 nA"},"row_4":{"col_1":"2.2 mA to 22 mA","col_2":"50 + 80 nA"},"row_5":{"col_1":"22 mA to 220 mA","col_2":"70 + 800 nA"},"row_6":{"col_1":"220 mA to 2.2 A","col_2":"130 + 25 µA"}}
The expanded uncertainties given in this table are expressed in (x*1.E-06*reading + y)
Multifunction calibrator
Approved on 06 August 2013
Institute service identifier : 3.3
CMC ID : EURAMET-EM-HR-00000D6N-1
 
AC voltage (up to the MHz range) , AC voltage up to 1100 V: sources : 1.00E-3 V to 700 V
Multifunction calibrator
Relative expanded uncertainty : 0.1 mV/V to 4.9E1 mV/V
{"row_1":{"col_1":"","col_2":"1 Hz to 40 Hz","col_3":"40 Hz to 1 kHz","col_4":"1 kHz to 20 kHz","col_5":"20 kHz to 50 kHz","col_6":"50 kHz to 100 kHz","col_7":"100 kHz to 300 kHz","col_8":"300 kHz to 1 MHz"},"row_2":{"col_1":"up to 10 mV","col_2":"0.035 + 0.035","col_3":"0.023 + 0.013","col_4":"0.035 + 0.013","col_5":"0.12 + 0.013","col_6":"0.58 + 0.013","col_7":"4.62 + 0.023","col_8":"-"},"row_3":{"col_1":"10 mV to 100 mV","col_2":"0.008 + 0.005","col_3":"0.008 + 0.002","col_4":"0.016 + 0.002","col_5":"0.035 + 0.002","col_6":"0.09 + 0.002","col_7":"0.35 + 0.012","col_8":"1.16 + 0.012"},"row_4":{"col_1":"100 mV to 1 V","col_2":"0.008 + 0.005","col_3":"0.008 + 0.002","col_4":"0.016 + 0.002","col_5":"0.035 + 0.002","col_6":"0.09 + 0.002","col_7":"0.35 + 0.012","col_8":"1.16 + 0.012"},"row_5":{"col_1":"1 V to 10 V","col_2":"0.008 + 0.005","col_3":"0.008 + 0.002","col_4":"0.016 + 0.002","col_5":"0.035 + 0.002","col_6":"0.09 + 0.002","col_7":"0.35 + 0.012","col_8":"1.16 + 0.012"},"row_6":{"col_1":"10 V to 100 V","col_2":"0.023 + 0.005","col_3":"0.023 + 0.002","col_4":"0.023 + 0.002","col_5":"0.040 + 0.002","col_6":"0.14 + 0.002","col_7":"0.46 + 0.012","col_8":"1.73 + 0.012"},"row_7":{"col_1":"100 V to 700 V (1000 V)","col_2":"0.046 + 0.005","col_3":"0.046 + 0.002","col_4":"0.069 + 0.002","col_5":"0.14 + 0.002","col_6":"0.35 + 0.002","col_7":"-","col_8":"-"}}
The expanded uncertainties given in this table are expressed in (x*1.E-02*reading + y*1.E-02*range)
Measurement with DMM
Frequency : 1 Hz to 1 MHz
Approved on 06 August 2013
Institute service identifier : 5.1
CMC ID : EURAMET-EM-HR-00000D6Q-1
 
DC resistance , DC resistance standards and sources: intermediate values : 1.00E-3 kΩ to 1000 kΩ
Fixed resistor
Relative expanded uncertainty : 1 µΩ/Ω to 5 µΩ/Ω
{"row_1":{"col_1":"","col_2":"Expanded uncertainty / (µΩ/Ω)"},"row_2":{"col_1":"0.1 mΩ to 1 mΩ","col_2":"50 to 12"},"row_3":{"col_1":"1 mΩ to 10 mΩ","col_2":"12 to 3"},"row_4":{"col_1":"10 mΩ to 100 mΩ","col_2":"3 to 1"},"row_5":{"col_1":"0.1 Ω to 1 Ω","col_2":"1"},"row_6":{"col_1":"1 Ω to 10 kΩ","col_2":"1 to 3"},"row_7":{"col_1":"10 kΩ to 100 kΩ","col_2":"3"},"row_8":{"col_1":"0.1 MΩ to 1 MΩ","col_2":"3 to 5"},"row_9":{"col_1":"1 MΩ to 10 MΩ","col_2":"5 to 8"},"row_10":{"col_1":"10 MΩ to 100 MΩ","col_2":"8 to 12"}}
The expanded uncertainties given in this table are expressed in µΩ/Ω
Comparison by means of DVM voltage ratio measurement method
Temperature : 23 °C
Approved on 06 August 2013
Institute service identifier : 2.3
CMC ID : EURAMET-EM-HR-00000D6Z-1
 
DC voltage (up to 1100 V) , DC voltage sources: single values : 1 V to 10 V
Solid state voltage standard
Relative expanded uncertainty : 5.0E-2 µV/V to 2.5 µV/V
{"row_1":{"col_1":"","col_2":"Expanded uncertainty / (µV/V)","col_3":"Reference Standard used in calibration"},"row_2":{"col_1":"1 V","col_2":"0.05","col_3":"Josephson Voltage Standard"},"row_3":{"col_1":"1.018 V","col_2":"0.05","col_3":"Josephson Voltage Standard"},"row_4":{"col_1":"10 V","col_2":"0.05","col_3":"Josephson Voltage Standard"},"row_5":{"col_1":"1 V","col_2":"2.5","col_3":"Solid State Voltage Standard"},"row_6":{"col_1":"1.018 V","col_2":"2.5","col_3":"Solid State Voltage Standard"},"row_7":{"col_1":"10 V","col_2":"0.8","col_3":"Solid State Voltage Standard"}}
Difference measurement
Fixed voltage : 1 V, 1.018 V, 10 V
Approved on 06 August 2013
Institute service identifier : 1.1
CMC ID : EURAMET-EM-HR-00000D6U-1
 
DC resistance , DC resistance standards and sources: intermediate values : 1 Ω to 1.00E6 Ω
Fixed resistor, resistance box
Relative expanded uncertainty : 1.3E1 µΩ/Ω to 7.8E1 µΩ/Ω
{"row_1":{"col_1":"","col_2":"Expanded uncertainty"},"row_2":{"col_1":"1 mΩ to 10 Ω","col_2":"18 + 6"},"row_3":{"col_1":"10 Ω to 100 Ω","col_2":"14 + 6"},"row_4":{"col_1":"100 Ω to 1 kΩ","col_2":"12 + 0.6"},"row_5":{"col_1":"1 kΩ to 10 kΩ","col_2":"12 + 0.6"},"row_6":{"col_1":"10 kΩ to 100 kΩ","col_2":"12 + 0.6"},"row_7":{"col_1":"100 kΩ to 1 MΩ","col_2":"18 + 3"},"row_8":{"col_1":"1 MΩ to 10 MΩ","col_2":"58 + 12"},"row_9":{"col_1":"10 MΩ to 100 MΩ","col_2":"580 + 12"},"row_10":{"col_1":"100 MΩ to 1 GΩ","col_2":"5800 + 12"}}
The expanded uncertainties given in this table are expressed in (x*1.E-06*reading + y*1.E-06*range)
Measurement with DMM
Approved on 06 August 2013
Institute service identifier : 2.4
CMC ID : EURAMET-EM-HR-00000D70-1
 
DC voltage (up to 1100 V) , DC voltage sources: intermediate values : 10 V to 1000 V
DC voltage source, calibrator
Relative expanded uncertainty : 1 µV/V to 2.3E1 µV/V
{"row_1":{"col_1":"","col_2":"Expanded uncertainty / (µV/V) ","col_3":"Reference standard used in calibration"},"row_2":{"col_1":"10 V to 1000 V","col_2":"13 to 23","col_3":"Agilent 3458A"},"row_3":{"col_1":"100 V","col_2":"1","col_3":"Fluke 752A"},"row_4":{"col_1":"1000 V","col_2":"1","col_3":"Fluke 752A"}}
Measurement with DMM or resistive divider
Approved on 06 August 2013
Institute service identifier : 1.11
CMC ID : EURAMET-EM-HR-00000D6V-1
 
DC resistance , DC resistance standards and sources: low values : 1 mΩ to 1000 mΩ
Fixed resistor, resistance box
Relative expanded uncertainty : 7.8E-2 mΩ/Ω to 6.0E1 mΩ/Ω
{"row_1":{"col_1":"","col_2":"Expanded uncertainty"},"row_2":{"col_1":"1 mΩ to 10 Ω","col_2":"18 + 6"},"row_3":{"col_1":"10 Ω to 100 Ω","col_2":"14 + 6"},"row_4":{"col_1":"100 Ω to 1 kΩ","col_2":"12 + 0.6"},"row_5":{"col_1":"1 kΩ to 10 kΩ","col_2":"12 + 0.6"},"row_6":{"col_1":"10 kΩ to 100 kΩ","col_2":"12 + 0.6"},"row_7":{"col_1":"100 kΩ to 1 MΩ","col_2":"18 + 3"},"row_8":{"col_1":"1 MΩ to 10 MΩ","col_2":"58 + 12"},"row_9":{"col_1":"10 MΩ to 100 MΩ","col_2":"580 + 12"},"row_10":{"col_1":"100 MΩ to 1 GΩ","col_2":"5800 + 12"}}
The expanded uncertainties given in this table are expressed in (x*1.E-06*reading + y*1.E-06*range)
Measurement with DMM
Approved on 06 August 2013
Institute service identifier : 2.2
CMC ID : EURAMET-EM-HR-00000D6Y-1
 
DC resistance , DC resistance standards and sources: high values : 1 MΩ to 1000 MΩ
Fixed resistor, resistance box
Relative expanded uncertainty : 2.1E-2 mΩ/Ω to 6 mΩ/Ω
{"row_1":{"col_1":"","col_2":"Expanded uncertainty"},"row_2":{"col_1":"1 mΩ to 10 Ω","col_2":"18 + 6"},"row_3":{"col_1":"10 Ω to 100 Ω","col_2":"14 + 6"},"row_4":{"col_1":"100 Ω to 1 kΩ","col_2":"12 + 0.6"},"row_5":{"col_1":"1 kΩ to 10 kΩ","col_2":"12 + 0.6"},"row_6":{"col_1":"10 kΩ to 100 kΩ","col_2":"12 + 0.6"},"row_7":{"col_1":"100 kΩ to 1 MΩ","col_2":"18 + 3"},"row_8":{"col_1":"1 MΩ to 10 MΩ","col_2":"58 + 12"},"row_9":{"col_1":"10 MΩ to 100 MΩ","col_2":"580 + 12"},"row_10":{"col_1":"100 MΩ to 1 GΩ","col_2":"5800 + 12"}}
The expanded uncertainties given in this table are expressed in (x*1.E-06*reading + y*1.E-06*range)
Measurement with DMM
Approved on 06 August 2013
Institute service identifier : 2.6
CMC ID : EURAMET-EM-HR-00000D72-1
 
AC current , AC current up to 100 A: sources : 1.00E-5 A to 1 A
Multifunction calibrator
Relative expanded uncertainty : 0.58 mA/A to 2.4E1 mA/A
{"row_1":{"col_1":"","col_2":"10 Hz to 20 Hz","col_3":"20 Hz to 45 Hz","col_4":"45 Hz to 100 Hz","col_5":"100 Hz to 5 kHz","col_6":"5 kHz to 20 kHz","col_7":"20 kHz to 50 kHz","col_8":"50 kHz to 100 kHz"},"row_2":{"col_1":"up to 100 µA","col_2":"0.46 + 0.035","col_3":"0.17 + 0.035","col_4":"0.07 + 0.035","col_5":"0.07 + 0.035","col_6":"-","col_7":"-","col_8":"-"},"row_3":{"col_1":"100 µA to 100 mA","col_2":"0.46 + 0.023","col_3":"0.17 + 0.023","col_4":"0.07 + 0.023","col_5":"0.035 + 0.023","col_6":"0.07 + 0.023","col_7":"0.46 + 0.046","col_8":"0.64 + 0.17"},"row_4":{"col_1":"100 mA to 1 A","col_2":"0.46 + 0.023","col_3":"0.18 + 0.023","col_4":"0.09 + 0.023","col_5":"0.12 + 0.023","col_6":"0.35 + 0.023","col_7":"1.16 + 0.046","col_8":"-"}}
The expanded uncertainties given in this table are expressed in (x*1.E-02*reading + y*1.E-02*range)
Measurement with DMM
Frequency : 10 Hz to 100 kHz
Approved on 06 August 2013
Institute service identifier : 6.1
CMC ID : EURAMET-EM-HR-00000D6S-1
 
DC voltage (up to 1100 V) , DC voltage meters: intermediate values : 1.00E-3 V to 1100 V
DC voltmeter, multimeter
Relative expanded uncertainty : 1.0E-2 µV/V to 6.1E2 µV/V
{"row_1":{"col_1":"","col_2":"Expanded uncertainty / µV ","col_3":"Reference standard used in calibration"},"row_2":{"col_1":"100 mV to 1 V","col_2":"0.01","col_3":"Supracon JAVS"},"row_3":{"col_1":"1 V to 10 V","col_2":"0.1","col_3":"Supracon JAVS"},"row_4":{"col_1":"1 mV to 220 mV","col_2":"8<I>U</I> + 0.6","col_3":"Fluke 5700A"},"row_5":{"col_1":"220 mV to 2.2 V","col_2":"7<I>U</I> + 1","col_3":"Fluke 5700A"},"row_6":{"col_1":"2.2 V to 11 V","col_2":"7<I>U</I> + 3.5","col_3":"Fluke 5700A"},"row_7":{"col_1":"11 V to 22 V","col_2":"7<I>U</I> + 6.5","col_3":"Fluke 5700A"},"row_8":{"col_1":"22 V to 220 V","col_2":"8<I>U</I> + 80","col_3":"Fluke 5700A"},"row_9":{"col_1":"220 V to 1100 V","col_2":"9<I>U</I> + 500","col_3":"Fluke 5700A"}}
The voltage U is expressed in volt V
Josephson voltage standard, multifunction calibrator
Approved on 06 August 2013
Institute service identifier : 1.12
CMC ID : EURAMET-EM-HR-00000D6W-1
 
DC resistance , DC resistance meters: intermediate values : 10 Ω to 1.00E8 Ω
Ohmmeter, multimeter
Relative expanded uncertainty : 1 µΩ/Ω to 1.2E1 µΩ/Ω
Reference and working resistance standards
Resistance : 1 ohm, 10 ohm, 100 ohm, 1 kohm, 10 kohm, 100 kohm, 1 Mohm, 10 Mohm, 100 Mohm
Approved on 06 August 2013
Institute service identifier : 2.8
CMC ID : EURAMET-EM-HR-00000D6K-1
 
Impedance (up to the MHz range) , Capacitance for low loss capacitors : 100 pF
Standard capacitor
Relative expanded uncertainty : 2 µF/F
Comparison by means of transformer bridge
Frequency : 1 kHz
Voltage : 100 V
Approved on 06 August 2013
Institute service identifier : 4.1
CMC ID : EURAMET-EM-HR-00000D6P-1
 

Select Metrology Area

General physics
Acoustics, Ultrasound, Vibration

This metrology area covers the fields of acoustics, ultrasound and vibration.

Electricity and Magnetism

This metrology area covers the fields of DC and AC measurements, impedance, electric and magnetic fields, radiofrequencies and measurements on materials.

Length

This metrology area covers the fields of laser frequencies and dimensional metrology.

Mass and related quantities

This metrology area covers the fields of mass standards, force, pressure, density, hardness, torque, gravity and viscosity.

Chemistry and Biology
Chemistry and Biology

This metrology area covers all fields relevant to chemistry and biology.

Ionizing radiation
Ionizing Radiation

This metrology area covers the fields of dosimetry, radioactivity and neutron measurements.