Metrology area, Sub-field | Electricity and Magnetism, DC Voltage and Current |
Description | Comparison of DC and low-frequency electrical quantities (voltage, current and resistance) |
Time of measurements | 2007 - 2009 |
Status | Approved |
Final Reports of the comparisons | |
Measurand | DC voltage: 100 mV, 10 V AC voltage: 1 V at 1 kHz, 10 V at 100 kHz, 100 V at 55 Hz DC current: 10 mA AC current: 1 A at 55 Hz DC resistance: 10 ohm, 100 kohm |
Transfer device | Two HP3458A, one Wavetek MTS4950, and one Keithley 2002 |
Comparison type | Supplementary Comparison |
Consultative Committee | CCEM (Consultative Committee for Electricity and Magnetism) |
Conducted by | SIM (Inter-American Metrology System) |
RMO Internal Identifier | SIM.1.5 |
Comments | This supplementary comparison is a repetition of SIM.EM-S1
|
Pilot institute |
NIST
National Institute of Standards and Technology United States |
Contact person | R. Elmquist +1 301 975 6591 |
Pilot laboratory | |
---|---|
NIST |
National Institute of Standards and Technology, United States, SIM |
CENAMEP AIP |
Centro Nacional de Metrología de Panama AIP, Panama, SIM |
CMEE |
Centro de Metrología del Ejercito Ecuatoriano, Ecuador, SIM |
ICE |
Instituto Costarricense de Electricidad, Costa Rica, SIM |
INDECOPI |
Instituto Nacional de Defensa de la Competencia y de la Protección de la Propiedad Intelectual, Peru, SIM |
INMETRO |
Instituto Nacional de Metrologia, Qualidade e Tecnologia, Brazil, SIM |
INTI |
Instituto Nacional de Tecnologia Industrial, Argentina, SIM |
LCPN-ME |
Laboratorio Custodio de Patrones Nacionales de Magnitudes Electricas, Chile, SIM |
SIC |
Superintendencia de Industria y Comercio, Colombia, SIM |
TTBS |
Trinidad and Tobago Bureau of Standards (Trinidad and Tobago/CARICOM), CARICOM (Caribbean Community), SIM |
UTE |
Administración Nacional de Usinas y Transmisiones Eléctricas, Uruguay, SIM |
This page proposes print-out on A4 paper (portrait) of the comparison details (best printed out using a black and white printer).
Please, select items to be printed out, then click on "OK" :