CCT-K10

MEASURAND : Temperature

TEMPERATURE : 962 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

962 °C
Di / °C
Participating institutes

*Difference from the KCRV of the average NPL results.

CCT-K10

MEASURAND : Temperature

TEMPERATURE : 1100 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

1100 °C
Di / °C
Participating institutes

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 1300 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

1300 °C
Di / °C
Participating institutes

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 1500 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

1500 °C
Di / °C
Participating institutes

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 1700 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

1700 °C
Di / °C
Participating institutes

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 1800 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

1800 °C
Di / °C
Participating institutes

*Difference from the KCRV of the average NPL results.

CCT-K10

 

MEASURAND : Temperature

TEMPERATURE : 2000 °C

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

2000 °C
Di / °C
Participating institutes

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2200 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

2200 °C
Di / °C
Participating institutes

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2400 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

2400 °C
Di / °C
Participating institutes

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2500 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

2500 °C
Di / °C
Participating institutes

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2600 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

2600 °C
Di / °C
Participating institutes

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2800 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

2800 °C
Di / °C
Participating institutes

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2900 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

2900 °C
Di / °C
Participating institutes

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 3000 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

3000 °C
Di / °C
Participating institutes

*Difference from the KCRV of the average NPL results.

CCT-K10

MEASURAND : Temperature

TEMPERATURE: 1325 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

Ni-C and Co-C cells
Di / °C
Participating institutes

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE: 1952 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

Ru-C cells
Di / °C
Participating institutes

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE: 2747 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

WC-C cells
Di / °C
Participating institutes

*Difference from the KCRV of the average NPL results.

CCT-K10

MEASURAND : Temperature

TEMPERATURE : 962 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

LABi Di Uneg,i Upos,i
°C
°C
°C
NMIJ -0.02 0.21
NIM -0.11 0.41
KRISS 0.03 0.24
NRC -0.14 0.56
NIST 0.05 0.59
LNE-Cnam 0.01 0.22
PTB -0.02 0.31
CEM -0.04 0.40
NPL* 0.07 0.50
Participating institutes
CCT-K10

*Difference from the KCRV of the average NPL results.

CCT-K10

MEASURAND : Temperature

TEMPERATURE : 1100 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

LABi Di Uneg,i Upos,i
°C
°C
°C
NMIJ 0.00 0.24
NIM -0.12 0.48
KRISS 0.01 0.24
NRC -0.14 0.62
NIST 0.02 0.62
LNE-Cnam 0.03 0.25
PTB 0.03 0.41
CEM -0.01 0.46
NPL* 0.07 0.56
Participating institutes
CCT-K10

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 1300 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

LABi Di Uneg,i Upos,i
°C
°C
°C
NMIJ -0.01 0.29
NIM -0.10 0.55
KRISS 0.09 0.30
NRC -0.15 0.75
NIST -0.09 0.68
LNE-Cnam -0.02 0.30
PTB 0.08 0.54
CEM -0.13 0.58
NPL* 0.10 0.66
Participating institutes
CCT-K10

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 1500 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

LABi Di Uneg,i Upos,i
°C
°C
°C
NMIJ 0.00 0.41
NIM -0.09 0.68
KRISS 0.07 0.44
NRC -0.14 0.93
NIST 0.06 0.81
LNE-Cnam -0.03 0.41
PTB 0.08 0.70
CEM -0.39 0.75
NPL* 0.10 0.78
Participating institutes
CCT-K10

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 1700 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

LABi Di Uneg,i Upos,i
°C
°C
°C
NMIJ 0.08 0.47
NIM 0.01 0.78
KRISS 0.16 0.63
NRC -0.02 1.13
NIST 0.00 0.93
LNE-Cnam -0.01 0.48
PTB -0.30 0.82
CEM -0.46 0.90
NPL* 0.12 0.92
Participating institutes
CCT-K10

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 1800 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

LABi Di Uneg,i Upos,i
°C
°C
°C
NMIJ 0.13 0.53
NIM 0.09 0.83
KRISS 0.20 0.66
NRC 0.05 1.25
NIST -0.08 1.01
LNE-Cnam -0.04 0.53
PTB -0.26 0.88
CEM -0.72 0.99
NPL* 0.09 1.02
Participating institutes
CCT-K10

*Difference from the KCRV of the average NPL results.

CCT-K10

 

MEASURAND : Temperature

TEMPERATURE : 2000 °C

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

LABi Di Uneg,i Upos,i
°C
°C
°C
NMIJ 0.09 0.65
NIM 0.00 1.10
KRISS 0.13 0.85
NRC 0.08 1.53
NIST -0.22 1.18
LNE-Cnam -0.17 0.63
PTB -0.51 0.94
CEM -0.52 1.18
NPL* 0.22 1.21
Participating institutes
CCT-K10

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2200 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

LABi Di Uneg,i Upos,i
°C
°C
°C
NMIJ 0.05 0.78
NIM 0.10 1.22
KRISS 0.09 1.11
NRC 0.13 1.86
NIST -0.49 1.36
LNE-Cnam -0.33 0.74
PTB -0.37 1.12
CEM -0.57 1.60
NPL* 0.03 1.43
Participating institutes
CCT-K10

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2400 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

LABi Di Uneg,i Upos,i
°C
°C
°C
NMIJ 0.26 1.08
NIM 0.93 1.50
KRISS 0.22 1.43
NRC 0.39 2.30
NIST -0.50 1.66
LNE-Cnam -0.42 1.01
PTB -0.56 1.42
CEM -1.64 1.93
NPL* 0.16 1.72
Participating institutes
CCT-K10

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2500 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

LABi Di Uneg,i Upos,i
°C
°C
°C
NMIJ 0.19 1.11
NIM 1.46 1.55
KRISS -0.05 1.53
NRC 0.35 2.47
NIST -0.48 1.74
PTB -0.91 1.44
CEM -0.38 2.01
NPL* 0.04 1.86
Participating institutes
CCT-K10

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2600 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

LABi Di Uneg,i Upos,i
°C
°C
°C
NMIJ 0.17 1.15
NIM 1.93 1.80
KRISS -0.13 1.63
NRC 0.38 2.67
NIST -0.65 1.83
LNE-Cnam -0.37 1.04
PTB -1.10 1.49
NPL* 0.14 1.93
Participating institutes
CCT-K10

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2800 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

LABi Di Uneg,i Upos,i
°C
°C
°C
NMIJ 0.12 1.45
NIM 2.42 2.44
KRISS -0.17 2.02
NRC 0.24 3.19
NIST -0.36 2.15
LNE-Cnam -0.47 1.31
PTB -1.60 1.81
NPL* 0.94 2.35
Participating institutes
CCT-K10

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2900 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

LABi Di Uneg,i Upos,i
°C
°C
°C
NMIJ -0.31 1.77
NIM 2.69 3.19
KRISS -0.34 2.42
NRC 0.14 3.51
PTB -2.24 2.11
NPL* 0.60 3.17
Participating institutes
CCT-K10

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 3000 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

LABi Di Uneg,i Upos,i
°C
°C
°C
NMIJ -0.68 1.65
KRISS -0.56 2.37
NRC 0.16 3.67
NPL* 0.45 3.55
Participating institutes
CCT-K10

*Difference from the KCRV of the average NPL results.

CCT-K10

MEASURAND : Temperature

TEMPERATURE: 1325 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

LABi Di Uneg,i Upos,i
°C
°C
°C
NMIJ 0.25 0.23
NIM 0.01 0.28
KRISS 0.09 0.25
NRC 0.35 0.98
NIST -0.26 0.74
LNE-Cnam -0.04 0.33
PTB -0.50 0.43
CEM -0.36 0.49
NPL* 0.01 0.43
Participating institutes
CCT-K10

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE: 1952 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

LABi Di Uneg,i Upos,i
°C
°C
°C
NMIJ 0.32 0.47
NIM -0.01 0.50
KRISS 0.24 0.68
NRC -0.11 1.82
NIST -0.31 1.06
LNE-Cnam -0.11 0.40
PTB -0.13 0.68
CEM -0.70 0.89
NPL* -0.03 0.70
Participating institutes
CCT-K10

*Difference from the KCRV of the average NPL results.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE: 2747 °C

 

Degrees of equivalence represented by Di  and its expanded uncertainty Ui  both expressed in °C.

LABi Di Uneg,i Upos,i
°C
°C
°C
NMIJ 0.18 0.90
NIM -0.05 0.96
KRISS 0.20 1.64
NRC -0.22 3.47
NIST -0.94 1.83
LNE-Cnam 0.13 0.73
CEM 0.34 1.69
NPL* -0.45 1.30
Participating institutes
CCT-K10

*Difference from the KCRV of the average NPL results.

Comparison
Comparison close
CC comparison
Linked comparison
CCT-K10
Metrology area, Sub-field Thermometry, Pyrometry
Description Realizations of the ITS-90 between 960 °C and 3000 °C
Time of measurements 2014 - 2016
Status Approved for equivalence
Final Reports of the comparisons
References

CCT-K10 registration and progress form

CCT-K10 Technical Protocol

Measurand Temperature: 960 °C, 1100 °C, 1300 °C, 1330 °C, 1500 °C, 1700 °C, 1800 °C, 1953 °C, 2000 °C, 2200 °C, 2400 °C, 2500 °C, 2600 °C, 2750 °C, 2800 °C, 2900 °C, 3000 °C
Parameters ITS-90 radiance temperature
Transfer device Two transfer radiation thermometers and a set of high temperature fixed-point blackbody cells
Comparison type Key Comparison
Consultative Committee CCT (Consultative Committee for Thermometry)
Conducted by CCT (Consultative Committee for Thermometry)
Comments
Results published on 26 June 2024.
Pilot institute NPL
National Physical Laboratory
United Kingdom
Contact person Helen McEvoy

+44 20 8943 6183
First Name Last Name
wwww@ww.www +356719836 Institute 1 Institute 1 Khmelnitskiy
Pilot laboratory
NPL

National Physical Laboratory, United Kingdom, EURAMET

CEM

Centro Español de Metrologia, Spain, EURAMET

KRISS

Korea Research Institute of Standards and Science, Korea, Republic of, APMP

LNE-LCM/Cnam

Conservatoire National des Arts et Métiers/Laboratoire Commun de Métrologie, France, EURAMET

NIM

National Institute of Metrology, China, APMP

NIST

National Institute of Standards and Technology, United States, SIM

NMIJ AIST

National Metrology Institute of Japan, Japan, APMP

NRC

National Research Council, Canada, SIM

PTB

Physikalisch-Technische Bundesanstalt, Germany, EURAMET

VNIIM

D.I. Mendeleyev Institute for Metrology, Rosstandart, Russian Federation, COOMET

CCT-K10

 

MEASURAND : Temperature

TEMPERATURE : 962 °C

 

For each transfer thermometer, the key comparison reference value xR was calculated using the median of the reported results and its associated standard uncertainty uR calculated using the 'median of absolute deviations (MAD)' method as described in Section 10.3 of the CCT-K10 Final reportuR-total is the total uncertainty of the reference value, including components for drift, corrections and uncertainty in the median value.

Thermometer xR uR uR-total
LP3 thermometer 4.19878 × 10-11 A 0.04  °C 0.06  °C
Chino thermometer 0.004871 V 0.03 °C 0.10 °C

 

The degree of equivalence of laboratory i relative to the key comparison reference value xR is given by a pair of terms, both expressed in °C:

Di and its expanded uncertainty Ui  (at 95% level of confidence) are computed according to Section 11 of the CCT-K10 Final report, where for each participant at each temperature, Di  has been calculated by taking the average (simple mean) of the differences between each participant's LP3 and Chino thermometer values, from their respective reference values (medians). The uncertainty Ui at each temperature was taken to be, for that participant, the largest total uncertainty (laboratory uncertainty combined with the uncertainty in the reference value); that is, the larger of the total uncertainty for the LP3 and Chino thermometer. Where data for one of the thermometers had been withdrawn from the comparison, the uncertainty was simply the total uncertainty related to the remaining thermometer.

CCT-K10

 

MEASURAND : Temperature

TEMPERATURE : 1100 °C

 

For each transfer thermometer, the key comparison reference value xR was calculated using the median of the reported results and its associated standard uncertainty uR calculated using the 'median of absolute deviations (MAD)' method as described in Section 10.3 of the CCT-K10 Final reportuR-total is the total uncertainty of the reference value, including components for drift, corrections and uncertainty in the median value.

Thermometer xR uR uR-total
LP3 thermometer 2.60581 ×10-10 A 0.02 °C 0.06 °C
Chino thermometer 0.030199 V  0.04 °C 0.11 °C

 

The degree of equivalence of laboratory i relative to the key comparison reference value xR is given by a pair of terms, both expressed in °C:

Di and its expanded uncertainty Ui  (at 95% level of confidence) are computed according to Section 11 of the CCT-K10 Final report, where for each participant at each temperature, Di  has been calculated by taking the average (simple mean) of the differences between each participant's LP3 and Chino thermometer values, from their respective reference values (medians). The uncertainty Ui at each temperature was taken to be, for that participant, the largest total uncertainty (laboratory uncertainty combined with the uncertainty in the reference value); that is, the larger of the total uncertainty for the LP3 and Chino thermometer. Where data for one of the thermometers had been withdrawn from the comparison, the uncertainty was simply the total uncertainty related to the remaining thermometer.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 1300 °C

 

For each transfer thermometer, the key comparison reference value xR was calculated using the median of the reported results and its associated standard uncertainty uR calculated using the 'median of absolute deviations (MAD)' method as described in Section 10.3 of the CCT-K10 Final reportuR-total is the total uncertainty of the reference value, including components for drift, corrections and uncertainty in the median value.

Thermometer xR uR uR-total
LP3 thermometer 2.01294 ×10-9 A 0.07 °C 0.10 °C
Chino thermometer 0.233136 V 0.02 °C  0.13 °C

 

The degree of equivalence of laboratory i relative to the key comparison reference value xR is given by a pair of terms, both expressed in °C:

Di and its expanded uncertainty Ui are computed according to Section 11 of the CCT-K10 Final report, where for each participant, Di at each temperature has been calculated by taking the average (simple mean) of the differences between each participant's LP3 and Chino thermometer values from their respective reference values (medians). The uncertainty Ui at each temperature was taken to be, for that participant, the largest total uncertainty (laboratory uncertainty combined with the uncertainty in the reference value); that is, the larger of the total uncertainty for the LP3 and the total uncertainty for the Chino thermometer. Where data for one of the thermometers had been withdrawn from the comparison, the uncertainty was simply the total uncertainty related to the remaining thermometer.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 1500 °C

 

For each transfer thermometer, the key comparison reference value xR was calculated using the median of the reported results and its associated standard uncertainty uR calculated using the 'median of absolute deviations (MAD)' method as described in Section 10.3 of the CCT-K10 Final reportuR-total is the total uncertainty of the reference value, including components for drift, corrections and uncertainty in the median value.

Thermometer xR uR uR-total
LP3 thermometer  9.80505 ×10-9 A 0.07 °C 0.11 °C
Chino thermometer 1.135095 V  0.09 °C  0.18 °C

 

The degree of equivalence of laboratory i relative to the key comparison reference value xR is given by a pair of terms, both expressed in °C:

Di and its expanded uncertainty Ui are computed according to Section 11 of the CCT-K10 Final report, where for each participant, Di at each temperature has been calculated by taking the average (simple mean) of the differences between each participant's LP3 and Chino thermometer values from their respective reference values (medians). The uncertainty Ui at each temperature was taken to be, for that participant, the largest total uncertainty (laboratory uncertainty combined with the uncertainty in the reference value); that is, the larger of the total uncertainty for the LP3 and the total uncertainty for the Chino thermometer. Where data for one of the thermometers had been withdrawn from the comparison, the uncertainty was simply the total uncertainty related to the remaining thermometer.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 1700 °C

 

For each transfer thermometer, the key comparison reference value xR was calculated using the median of the reported results and its associated standard uncertainty uR calculated using the 'median of absolute deviations (MAD)' method as described in Section 10.3 of the CCT-K10 Final reportuR-total is the total uncertainty of the reference value, including components for drift, corrections and uncertainty in the median value.

Thermometer xR uR uR-total
LP3 thermometer 3.46361 ×10-8 A 0.08 °C 0.13 °C
Chino thermometer 4.008140 V  0.06 °C  0.19 °C

 

The degree of equivalence of laboratory i relative to the key comparison reference value xR is given by a pair of terms, both expressed in °C:

Di and its expanded uncertainty Ui are computed according to Section 11 of the CCT-K10 Final report, where for each participant, Di at each temperature has been calculated by taking the average (simple mean) of the differences between each participant's LP3 and Chino thermometer values from their respective reference values (medians). The uncertainty Ui at each temperature was taken to be, for that participant, the largest total uncertainty (laboratory uncertainty combined with the uncertainty in the reference value); that is, the larger of the total uncertainty for the LP3 and the total uncertainty for the Chino thermometer. Where data for one of the thermometers had been withdrawn from the comparison, the uncertainty was simply the total uncertainty related to the remaining thermometer.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 1800 °C

 

For each transfer thermometer, the key comparison reference value xR was calculated using the median of the reported results and its associated standard uncertainty uR calculated using the 'median of absolute deviations (MAD)' method as described in Section 10.3 of the CCT-K10 Final reportuR-total is the total uncertainty of the reference value, including components for drift, corrections and uncertainty in the median value.

Thermometer xR uR uR-total
LP3 thermometer  5.94185 ×10-8 A 0.11 °C 0.16 °C
Chino thermometer 6.874136 V 0.08 °C  0.21 °C

 

The degree of equivalence of laboratory i relative to the key comparison reference value xR is given by a pair of terms, both expressed in °C:

Di and its expanded uncertainty Ui are computed according to Section 11 of the CCT-K10 Final report, where for each participant, Di at each temperature has been calculated by taking the average (simple mean) of the differences between each participant's LP3 and Chino thermometer values from their respective reference values (medians). The uncertainty Ui at each temperature was taken to be, for that participant, the largest total uncertainty (laboratory uncertainty combined with the uncertainty in the reference value); that is, the larger of the total uncertainty for the LP3 and the total uncertainty for the Chino thermometer. Where data for one of the thermometers had been withdrawn from the comparison, the uncertainty was simply the total uncertainty related to the remaining thermometer.

CCT-K10

 

MEASURAND : Temperature

TEMPERATURE : 2000 °C

 

For each transfer thermometer, the key comparison reference value xR was calculated using the median of the reported results and its associated standard uncertainty uR calculated using the 'median of absolute deviations (MAD)' method as described in Section 10.3 of the CCT-K10 Final reportuR-total is the total uncertainty of the reference value, including components for drift, corrections and uncertainty in the median value.

Thermometer xR uR uR-total
LP3 thermometer 1.51734 ×10-7 A 0.10 °C 0.17 °C
Chino thermometer 1.747312 V 0.10 °C 0.25 °C

 

The degree of equivalence of laboratory i relative to the key comparison reference value xR is given by a pair of terms, both expressed in °C:

Di and its expanded uncertainty Ui are computed according to Section 11 of the CCT-K10 Final report, where for each participant, Di at each temperature has been calculated by taking the average (simple mean) of the differences between each participant's LP3 and Chino thermometer values from their respective reference values (medians). The uncertainty Ui at each temperature was taken to be, for that participant, the largest total uncertainty (laboratory uncertainty combined with the uncertainty in the reference value); that is, the larger of the total uncertainty for the LP3 and the total uncertainty for the Chino thermometer. Where data for one of the thermometers had been withdrawn from the comparison, the uncertainty was simply the total uncertainty related to the remaining thermometer.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2200 °C

 

For each transfer thermometer, the key comparison reference value xR was calculated using the median of the reported results and its associated standard uncertainty uR calculated using the 'median of absolute deviations (MAD)' method as described in Section 10.3 of the CCT-K10 Final reportuR-total is the total uncertainty of the reference value, including components for drift, corrections and uncertainty in the median value.

Thermometer xR uR uR-total
LP3 thermometer 3.32893 ×10-7 A 0.15 °C 0.22 °C
Chino thermometer 3.835241 V 0.12 °C  0.30 °C

 

The degree of equivalence of laboratory i relative to the key comparison reference value xR is given by a pair of terms, both expressed in °C:

Di and its expanded uncertainty Ui are computed according to Section 11 of the CCT-K10 Final report, where for each participant, Di at each temperature has been calculated by taking the average (simple mean) of the differences between each participant's LP3 and Chino thermometer values from their respective reference values (medians). The uncertainty Ui at each temperature was taken to be, for that participant, the largest total uncertainty (laboratory uncertainty combined with the uncertainty in the reference value); that is, the larger of the total uncertainty for the LP3 and the total uncertainty for the Chino thermometer. Where data for one of the thermometers had been withdrawn from the comparison, the uncertainty was simply the total uncertainty related to the remaining thermometer.

CCT-K10

MEASURAND : Temperature

TEMPERATURE : 2400 °C

 

For each transfer thermometer, the key comparison reference value xR was calculated using the median of the reported results and its associated standard uncertainty uR calculated using the 'median of absolute deviations (MAD)' method as described in Section 10.3 of the CCT-K10 Final reportuR-total is the total uncertainty of the reference value, including components for drift, corrections and uncertainty in the median value.

Thermometer xR uR uR-total
LP3 thermometer 6.49278 ×10-7 A 0.21 °C  0.28 °C
Chino thermometer 7.473960 V 0.30 °C  0.44 °C

 

The degree of equivalence of laboratory i relative to the key comparison reference value xR is given by a pair of terms, both expressed in °C:

Di and its expanded uncertainty Ui are computed according to Section 11 of the CCT-K10 Final report, where for each participant, Di at each temperature has been calculated by taking the average (simple mean) of the differences between each participant's LP3 and Chino thermometer values from their respective reference values (medians). The uncertainty Ui at each temperature was taken to be, for that participant, the largest total uncertainty (laboratory uncertainty combined with the uncertainty in the reference value); that is, the larger of the total uncertainty for the LP3 and the total uncertainty for the Chino thermometer. Where data for one of the thermometers had been withdrawn from the comparison, the uncertainty was simply the total uncertainty related to the remaining thermometer.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2500 °C

 

For each transfer thermometer, the key comparison reference value xR was calculated using the median of the reported results and its associated standard uncertainty uR calculated using the 'median of absolute deviations (MAD)' method as described in Section 10.3 of the CCT-K10 Final reportuR-total is the total uncertainty of the reference value, including components for drift, corrections and uncertainty in the median value.

Thermometer xR uR uR-total
LP3 thermometer 8.74685 ×10-7 A 0.19 °C  0.32 °C
Chino thermometer 1.008179 V 0.27 °C 0.43 °C

 

The degree of equivalence of laboratory i relative to the key comparison reference value xR is given by a pair of terms, both expressed in °C:

Di and its expanded uncertainty Ui are computed according to Section 11 of the CCT-K10 Final report, where for each participant, Di at each temperature has been calculated by taking the average (simple mean) of the differences between each participant's LP3 and Chino thermometer values from their respective reference values (medians). The uncertainty Ui at each temperature was taken to be, for that participant, the largest total uncertainty (laboratory uncertainty combined with the uncertainty in the reference value); that is, the larger of the total uncertainty for the LP3 and the total uncertainty for the Chino thermometer. Where data for one of the thermometers had been withdrawn from the comparison, the uncertainty was simply the total uncertainty related to the remaining thermometer.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2600 °C

 

For each transfer thermometer, the key comparison reference value xR was calculated using the median of the reported results and its associated standard uncertainty uR calculated using the 'median of absolute deviations (MAD)' method as described in Section 10.3 of the CCT-K10 Final reportuR-total is the total uncertainty of the reference value, including components for drift, corrections and uncertainty in the median value.

Thermometer xR uR uR-total
LP3 thermometer 1.15413 ×10-6 A 0.19 °C 0.34 °C
Chino thermometer 1.330654 V 0.23 °C  0.43 °C

 

The degree of equivalence of laboratory i relative to the key comparison reference value xR is given by a pair of terms, both expressed in °C:

Di and its expanded uncertainty Ui are computed according to Section 11 of the CCT-K10 Final report, where for each participant, Di at each temperature has been calculated by taking the average (simple mean) of the differences between each participant's LP3 and Chino thermometer values from their respective reference values (medians). The uncertainty Ui at each temperature was taken to be, for that participant, the largest total uncertainty (laboratory uncertainty combined with the uncertainty in the reference value); that is, the larger of the total uncertainty for the LP3 and the total uncertainty for the Chino thermometer. Where data for one of the thermometers had been withdrawn from the comparison, the uncertainty was simply the total uncertainty related to the remaining thermometer.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2800 °C

 

 

For each transfer thermometer, the key comparison reference value xR was calculated using the median of the reported results and its associated standard uncertainty uR calculated using the 'median of absolute deviations (MAD)' method as described in Section 10.3 of the CCT-K10 Final reportuR-total is the total uncertainty of the reference value, including components for drift, corrections and uncertainty in the median value.

Thermometer xR uR uR-total
LP3 thermometer 1.90405 ×10-6 A 0.23 °C 0.39 °C
Chino thermometer 2.195758 V 0.39 °C 0.57 °C

 

The degree of equivalence of laboratory i relative to the key comparison reference value xR is given by a pair of terms, both expressed in °C:

Di and its expanded uncertainty Ui are computed according to Section 11 of the CCT-K10 Final report, where for each participant, Di at each temperature has been calculated by taking the average (simple mean) of the differences between each participant's LP3 and Chino thermometer values from their respective reference values (medians). The uncertainty Ui at each temperature was taken to be, for that participant, the largest total uncertainty (laboratory uncertainty combined with the uncertainty in the reference value); that is, the larger of the total uncertainty for the LP3 and the total uncertainty for the Chino thermometer. Where data for one of the thermometers had been withdrawn from the comparison, the uncertainty was simply the total uncertainty related to the remaining thermometer.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2900 °C

 

For each transfer thermometer, the key comparison reference value xR was calculated using the median of the reported results and its associated standard uncertainty uR calculated using the 'median of absolute deviations (MAD)' method as described in Section 10.3 of the CCT-K10 Final reportuR-total is the total uncertainty of the reference value, including components for drift, corrections and uncertainty in the median value.

Thermometer xR uR uR-total
LP3 thermometer 2.39099 ×10-6 A  0.25 °C 0.42 °C
Chino thermometer 2.756808 V 0.59 °C 0.74 °C

 

The degree of equivalence of laboratory i relative to the key comparison reference value xR is given by a pair of terms, both expressed in °C:

Di and its expanded uncertainty Ui are computed according to Section 11 of the CCT-K10 Final report, where for each participant, Di at each temperature has been calculated by taking the average (simple mean) of the differences between each participant's LP3 and Chino thermometer values from their respective reference values (medians). The uncertainty Ui at each temperature was taken to be, for that participant, the largest total uncertainty (laboratory uncertainty combined with the uncertainty in the reference value); that is, the larger of the total uncertainty for the LP3 and the total uncertainty for the Chino thermometer. Where data for one of the thermometers had been withdrawn from the comparison, the uncertainty was simply the total uncertainty related to the remaining thermometer.

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 3000 °C

 

For each transfer thermometer, the key comparison reference value xR was calculated using the median of the reported results and its associated standard uncertainty uR calculated using the 'median of absolute deviations (MAD)' method as described in Section 10.3 of the CCT-K10 Final reportuR-total is the total uncertainty of the reference value, including components for drift, corrections and uncertainty in the median value.

Thermometer xR uR uR-total
LP3 thermometer  2.95777 ×10-6 A 0.24 °C  0.43 °C
Chino thermometer  3.416361 V 0.42 °C 0.63 °C

 

The degree of equivalence of laboratory i relative to the key comparison reference value xR is given by a pair of terms, both expressed in °C:

Di and its expanded uncertainty Ui are computed according to Section 11 of the CCT-K10 Final report, where for each participant, Di at each temperature has been calculated by taking the average (simple mean) of the differences between each participant's LP3 and Chino thermometer values from their respective reference values (medians). The uncertainty Ui at each temperature was taken to be, for that participant, the largest total uncertainty (laboratory uncertainty combined with the uncertainty in the reference value); that is, the larger of the total uncertainty for the LP3 and the total uncertainty for the Chino thermometer. Where data for one of the thermometers had been withdrawn from the comparison, the uncertainty was simply the total uncertainty related to the remaining thermometer.

CCT-K10

MEASURAND : Temperature

TEMPERATURE: 1325 °C

 

The key comparison reference value xR and its associated standard uncertainty uR are calculated from the weighted mean with cut-off according to Section 12 of the CCT-K10 Final reportuR-total is the total uncertainty of the reference value, including components for the furnace, cell stability, corrections and uncertainty in the weighted mean value.

 

        xR = 1324.75 °C     uR = 0.04 °C     uR-total = 0.16 °C

 

The degree of equivalence of laboratory i relative to the key comparison reference value xR is given by a pair of terms, both expressed in °C:

Di = (xi - xRand Ui  its expanded uncertainty (at 95%level of confidence)  is computed according to equation (14) in Section 12 of the CCT-K10 Final report.

CCT-K10

MEASURAND : Temperature

TEMPERATURE: 1952 °C

 

The key comparison reference value xR and its associated standard uncertainty uR are calculated from the weighted mean with cut-off according to Section 12 of the CCT-K10 Final reportuR-total is the total uncertainty of the reference value, including components for the furnace, cell stability, corrections and uncertainty in the weighted mean value.

 

       xR = 1952.99 °C     uR = 0.09 °C     uR-total = 0.19 °C

 

The degree of equivalence of laboratory i relative to the key comparison reference value xR is given by a pair of terms, both expressed in °C:

Di = (xi - xRand its expanded uncertainty Ui are computed according to section 12 of the CCT-K10 Final report.

CCT-K10

MEASURAND : Temperature

TEMPERATURE: 2747 °C

 

The key comparison reference value xR and its associated standard uncertainty uR are calculated from the weighted mean with cut-off according to Section 12 of the CCT-K10 Final reportuR-total is the total uncertainty of the reference value, including components for the furnace, cell stability, corrections and uncertainty in the weighted mean value.

 

       xR = 2747.25 °C     uR = 0.18 °C     uR-total = 0.35 °C

 

The degree of equivalence of laboratory i relative to the key comparison reference value xR is given by a pair of terms, both expressed in °C:

Di = (xi - xRand Ui  its expanded uncertainty (at 95%level of confidence)  is computed according to equation (14) in Section 12 of the CCT-K10 Final report.

CCT-K10

 

MEASURAND : Temperature

TEMPERATURE : 962 °C

 

Transfer thermometer: LP3 thermometer

xi   LP3 thermometer output photocurrent corresponding to the ITS-90 radiance temperature 962 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  A °C °C
  NMIJ 4.20018E-11 0.04 0.07
  NIM 4.19529E-11 0.14 0.15
  KRISS 4.19878E-11 0.07 0.09
  NRC 4.19202E-11 0.27 0.27
  NIST 4.20188E-11 0.28 0.29
  LNE-Cnam 4.20025E-11 0.05 0.08
  PTB 4.19539E-11 0.12 0.14
  CEM 4.19262E-11 0.17 0.18
  NPL 4.20726E-11 0.18 0.18

 

 

Transfer thermometer: Chino thermometer

xi   Chino thermometer output voltage corresponding to the ITS-90 radiance temperature 962 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  V °C °C
  NMIJ 0.004867 0.05 0.11
  NIM 0.004859 0.18 0.20
  KRISS 0.004876 0.07 0.12
  NRC 0.004860 0.27 0.28
  NIST 0.004875 0.28 0.30
  LNE-Cnam 0.004871 0.05 0.11
  PTB 0.004872 0.12 0.15
  CEM 0.004872 0.17 0.20
  NPL 0.004871 0.23 0.25

 

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 1100 °C

 

Transfer thermometer: LP3 thermometer

xi   LP3 thermometer output photocurrent corresponding to the ITS-90 radiance temperature 1100 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  A °C °C
  NMIJ 2.60644E-10 0.04 0.07
  NIM 2.60475E-10 0.15 0.16
  KRISS 2.60648E-10 0.04 0.08
  NRC 2.60236E-10 0.29 0.30
  NIST 2.60499E-10 0.29 0.29
  LNE-Cnam 2.60581E-10 0.06 0.09
  PTB 2.60735E-10 0.17 0.19
  CEM 2.60156E-10 0.20 0.21
  NPL 2.61033E-10 0.22 0.22

 

 

Transfer thermometer: Chino thermometer

xi   Chino thermometer output voltage corresponding to the ITS-90 radiance temperature 1100 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  V °C °C
  NMIJ 0.030190 0.05 0.12
  NIM 0.030123 0.21 0.24
  KRISS 0.030196 0.05 0.12
  NRC 0.030136 0.29 0.31
  NIST 0.030220 0.29 0.31
  LNE-Cnam 0.030219 0.06 0.13
  PTB 0.030203 0.17 0.21
  CEM 0.030243 0.20 0.23
  NPL 0.030199 0.26 0.28

CCT-K10

 

MEASURAND : Temperature

TEMPERATURE : 1300 °C

 

Transfer thermometer: LP3 thermometer

xi   LP3 thermometer output photocurrent corresponding to the ITS-90 radiance temperature 1300 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  A °C °C
  NMIJ 2.01316E-09 0.06 0.12
  NIM 2.01294E-09 0.17 0.20
  KRISS 2.01358E-09 0.08 0.13
  NRC 2.01043E-09 0.35 0.36
  NIST 2.01103E-09 0.32 0.33
  LNE-Cnam 2.01181E-09 0.09 0.13
  PTB 2.01568E-09 0.23 0.25
  CEM 2.00809E-09 0.25 0.28
  NPL 2.01626E-09 0.27 0.29

 

 

Transfer thermometer: Chino thermometer

xi   Chino thermometer output voltage corresponding to the ITS-90 radiance temperature 1300 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  V °C °C
  NMIJ 0.233086 0.07 0.14
  NIM 0.232733 0.24 0.27
  KRISS 0.233438 0.08 0.15
  NRC 0.232796 0.35 0.37
  NIST 0.232984 0.32 0.34
  LNE-Cnam 0.233171 0.08 0.15
  PTB 0.233136 0.24 0.27
  CEM 0.233139 0.26 0.29
  NPL 0.233182 0.30 0.33

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 1500 °C

 

Transfer thermometer: LP3 thermometer

xi   LP3 thermometer output photocurrent corresponding to the ITS-90 radiance temperature 1500 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  A °C °C
  NMIJ 9.80554E-09 0.08 0.14
  NIM 9.80629E-09 0.20 0.23
  KRISS 9.80505E-09 0.14 0.18
  NRC 9.79562E-09 0.43 0.44
  NIST 9.80733E-09 0.37 0.38
  LNE-Cnam 9.79790E-09 0.11 0.15
  PTB 9.79782E-09 0.29 0.32
  CEM 9.76223E-09 0.32 0.34
  NPL 9.81852E-09 0.32 0.34

 

 

Transfer thermometer: Chino thermometer

xi   Chino thermometer output voltage corresponding to the ITS-90 radiance temperature 1500 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  V °C °C
  NMIJ 1.134986 0.10 0.20
  NIM 1.133486 0.28 0.34
  KRISS 1.136242 0.13 0.22
  NRC 1.133935 0.43 0.47
  NIST 1.135770 0.37 0.41
  LNE-Cnam 1.135364 0.11 0.21
  PTB 1.137261 0.30 0.35
  CEM 1.133876 0.32 0.37
  NPL 1.135095 0.35 0.39

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 1700 °C

 

Transfer thermometer: LP3 thermometer

xi   LP3 thermometer output photocurrent corresponding to the ITS-90 radiance temperature 1700 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  A °C °C
  NMIJ 3.46502E-08 0.11 0.17
  NIM 3.46587E-08 0.24 0.28
  KRISS 3.46465E-08 0.21 0.25
  NRC 3.46243E-08 0.53 0.55
  NIST 3.46361E-08 0.42 0.45
  LNE-Cnam 3.46011E-08 0.14 0.19
  PTB 3.45794E-08 0.36 0.39
  CEM 3.44904E-08 0.39 0.42
  NPL 3.46823E-08 0.40 0.42

 

 

Transfer thermometer: Chino thermometer

xi   Chino thermometer output voltage corresponding to the ITS-90 radiance temperature 1700 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  V °C °C
  NMIJ 4.010009 0.14 0.24
  NIM 4.005949 0.33 0.39
  KRISS 4.014277 0.25 0.32
  NRC 4.008684 0.53 0.56
  NIST 4.008135 0.42 0.47
  LNE-Cnam 4.011732 0.14 0.24
  PTB 4.001250 0.36 0.41
  CEM 4.004105 0.40 0.45
  NPL 4.008140 0.42 0.46

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 1800 °C

 

Transfer thermometer: LP3 thermometer

xi   LP3 thermometer output photocurrent corresponding to the ITS-90 radiance temperature 1800 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  A °C °C
  NMIJ 5.94519E-08 0.13 0.21
  NIM 5.94718E-08 0.26 0.31
  KRISS 5.94351E-08 0.25 0.30
  NRC 5.94185E-08 0.59 0.61
  NIST 5.94024E-08 0.46 0.49
  LNE-Cnam 5.93548E-08 0.15 0.22
  PTB 5.93455E-08 0.40 0.44
  CEM 5.90878E-08 0.44 0.47
  NPL 5.94886E-08 0.46 0.49

 

 

Transfer thermometer: Chino thermometer

xi   Chino thermometer output voltage corresponding to the ITS-90 radiance temperature 1800 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  V °C °C
  NMIJ 6.879800 0.16 0.27
  NIM 6.874136 0.34 0.42
  KRISS 6.886391 0.25 0.33
  NRC 6.877912 0.59 0.62
  NIST 6.870674 0.46 0.51
  LNE-Cnam 6.878651 0.15 0.27
  PTB 6.864309 0.33 0.40
  CEM 6.861510 0.44 0.49
  NPL 6.872750 0.46 0.51

CCT-K10

 

MEASURAND : Temperature

TEMPERATURE : 2000 °C

 

Transfer thermometer: LP3 thermometer

xi   LP3 thermometer output photocurrent corresponding to the ITS-90 radiance temperature 2000 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  A °C °C
  NMIJ 1.51782E-07 0.17 0.24
  NIM 1.51832E-07 0.37 0.41
  KRISS 1.51734E-07 0.34 0.39
  NRC 1.51763E-07 0.72 0.74
  NIST 1.51654E-07 0.53 0.56
  LNE-Cnam 1.51517E-07 0.18 0.25
  PTB 1.51449E-07 0.40 0.45
  CEM 1.51250E-07 0.52 0.55
  NPL 1.51978E-07 0.51 0.54

 

 

Transfer thermometer: Chino thermometer

xi   Chino thermometer output voltage corresponding to the ITS-90 radiance temperature 2000 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  V °C °C
  NMIJ 1.748152 0.20 0.33
  NIM 1.746161 0.47 0.55
  KRISS 1.749278 0.34 0.43
  NRC 1.748160 0.72 0.77
  NIST 1.744942 0.53 0.59
  LNE-Cnam 1.747312 0.18 0.31
  PTB 1.742937 0.39 0.47
  CEM 1.745093 0.52 0.59
  NPL 1.747862 0.55 0.60

CCT-K10

 

MEASURAND : Temperature

TEMPERATURE : 2200 °C

 

Transfer thermometer: LP3 thermometer

xi   LP3 thermometer output photocurrent corresponding to the ITS-90 radiance temperature 2200 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  A °C °C
  NMIJ 3.33016E-07 0.21 0.30
  NIM 3.33111E-07 0.41 0.47
  KRISS 3.32893E-07 0.47 0.53
  NRC 3.33113E-07 0.88 0.91
  NIST 3.32619E-07 0.61 0.66
  LNE-Cnam 3.32378E-07 0.22 0.31
  PTB 3.32601E-07 0.47 0.54
  CEM 3.31411E-07 0.73 0.76
  NPL 3.33256E-07 0.62 0.65

 

 

Transfer thermometer: Chino thermometer

xi   Chino thermometer output voltage corresponding to the ITS-90 radiance temperature 2200 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  V °C °C
  NMIJ 3.835241 0.26 0.39
  NIM 3.835637 0.52 0.61
  KRISS 3.837690 0.47 0.56
  NRC 3.836444 0.88 0.93
  NIST 3.824819 0.61 0.68
  LNE-Cnam 3.832084 0.22 0.37
  PTB 3.828337 0.47 0.56
  CEM 3.836372 0.73 0.80
  NPL 3.831870 0.65 0.71

CCT-K10

MEASURAND : Temperature

TEMPERATURE : 2400 °C

Transfer thermometer: LP3 thermometer

xi   LP3 thermometer output photocurrent corresponding to the ITS-90 radiance temperature 2400 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  A °C °C
  NMIJ 6.49658E-07 0.25 0.38
  NIM 6.49890E-07 0.47 0.55
  KRISS 6.49278E-07 0.56 0.64
  NRC 6.49914E-07 1.06 1.10
  NIST 6.48629E-07 0.71 0.76
  LNE-Cnam 6.48153E-07 0.26 0.38
  PTB 6.48145E-07 0.55 0.64
  CEM 6.48478E-07 0.84 0.90
  NPL 6.49917E-07 0.71 0.76

 

 

Transfer thermometer: Chino thermometer

xi   Chino thermometer output voltage corresponding to the ITS-90 radiance temperature 2400 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  V °C °C
  NMIJ 7.481484 0.32 0.54
  NIM 7.509864 0.59 0.75
  KRISS 7.484104 0.56 0.71
  NRC 7.484545 1.06 1.15
  NIST 7.458087 0.71 0.83
  LNE-Cnam 7.467360 0.25 0.51
  PTB 7.461211 0.56 0.71
  CEM 7.407262 0.85 0.96
  NPL 7.473960 0.74 0.86

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2500 °C

 

Transfer thermometer: LP3 thermometer

xi   LP3 thermometer output photocurrent corresponding to the ITS-90 radiance temperature 2500 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  A °C °C
  NMIJ 8.75211E-07 0.28 0.43
  NIM 8.75452E-07 0.49 0.60
  KRISS 8.74053E-07 0.63 0.71
  NRC 8.75697E-07 1.16 1.21
  NIST 8.74159E-07 0.76 0.83
  LNE-Cnam - - -
  PTB 8.72603E-07 0.60 0.70
  CEM 8.73965E-07 0.89 0.96
  NPL 8.75278E-07 0.76 0.83

'- Did not measure

 

Transfer thermometer: Chino thermometer

xi   Chino thermometer output voltage corresponding to the ITS-90 radiance temperature 2500 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  V °C °C
  NMIJ 1.008692 0.35 0.56
  NIM 1.015756 0.62 0.78
  KRISS 1.008606 0.63 0.76
  NRC 1.009021 1.16 1.24
  NIST 1.005982 0.76 0.87
  LNE-Cnam - - -
  PTB 1.005326 0.57 0.72
  CEM 1.006790 0.89 1.00
  NPL 1.007751 0.82 0.93

'- Did not measure

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2600 °C

 

Transfer thermometer: LP3 thermometer

xi   LP3 thermometer output photocurrent corresponding to the ITS-90 radiance temperature 2600 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  A °C °C
  NMIJ 1.15490E-06 0.30 0.46
  NIM 1.15520E-06 0.66 0.75
  KRISS 1.15334E-06 0.70 0.79
  NRC 1.15600E-06 1.27 1.31
  NIST 1.15336E-06 0.81 0.88
  LNE-Cnam 1.15329E-06 0.32 0.47
  PTB 1.15110E-06 0.61 0.72
  CEM - - -
  NPL 1.15499E-06 0.82 0.89

'- Did not measure

 

 

Transfer thermometer: Chino thermometer

xi   Chino thermometer output voltage corresponding to the ITS-90 radiance temperature 2600 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  V °C °C
  NMIJ 1.331014 0.38 0.57
  NIM 1.343191 0.77 0.90
  KRISS 1.330620 0.69 0.82
  NRC 1.331247 1.26 1.33
  NIST 1.326912 0.81 0.91
  LNE-Cnam 1.328954 0.29 0.52
  PTB 1.326265 0.60 0.74
  CEM - - -
  NPL 1.330688 0.86 0.96

'- Did not measure

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2800 °C

 

Transfer thermometer: LP3 thermometer

xi   LP3 thermometer output photocurrent corresponding to the ITS-90 radiance temperature 962 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  A °C °C
  NMIJ 1.90520E-06 0.36 0.54
  NIM 1.90539E-06 0.95 1.03
  KRISS 1.90247E-06 0.84 0.94
  NRC 1.90596E-06 1.50 1.55
  NIST 1.90270E-06 0.92 1.00
  LNE-Cnam 1.90290E-06 0.36 0.54
  PTB 1.89782E-06 0.70 0.83
  CEM - - -
  NPL 1.90680E-06 0.92 1.00

'- Did not measure

 

Transfer thermometer: Chino thermometer

xi   Chino thermometer output voltage corresponding to the ITS-90 radiance temperature 962 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  V °C °C
  NMIJ 2.195663 0.45 0.73
  NIM 2.219083 1.06 1.22
  KRISS 2.195853 0.84 1.01
  NRC 2.195996 1.49 1.60
  NIST 2.193646 0.92 1.08
  LNE-Cnam 2.192222 0.33 0.66
  PTB 2.186457 0.70 0.90
  CEM - - -
  NPL 2.202267 1.03 1.18

'- Did not measure

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 2900 °C

 

Transfer thermometer: LP3 thermometer

xi   LP3 thermometer output photocurrent corresponding to the ITS-90 radiance temperature 2900 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  A °C °C
  NMIJ 2.38995E-06 0.39 0.58
  NIM 2.39309E-06 1.30 1.37
  KRISS 2.38771E-06 0.96 1.06
  NRC 2.39207E-06 1.60 1.66
  NIST - - -
  LNE-Cnam - - -
  PTB 2.37990E-06 0.75 0.89
  CEM - - -
  NPL 2.39202E-06 1.14 1.22

'- Did not measure

 

Transfer thermometer: Chino thermometer

xi   Chino thermometer output voltage corresponding to the ITS-90 radiance temperature 2900 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  V °C °C
  NMIJ 2.754281 0.49 0.89
  NIM 2.787050 1.40 1.59
  KRISS 2.756414 0.96 1.21
  NRC 2.757202 1.59 1.76
  NIST - - -
  LNE-Cnam - - -
  PTB 2.742404 0.75 1.05
  CEM - - -
  NPL 2.762893 1.40 1.59

'- Did not measure

CCT-K10 

MEASURAND : Temperature

TEMPERATURE : 3000 °C

 

Transfer thermometer: LP3 thermometer

xi   LP3 thermometer output photocurrent corresponding to the ITS-90 radiance temperature 3000 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  A °C °C
  NMIJ 2.956931E-06 0.42 0.61
  NIM - - -
  KRISS 2.952081E-06 1.00 1.10
  NRC 2.958604E-06 1.73 1.78
  NIST - - -
  LNE-CNAM - - -
  PTB - - -
  CEM - - -
  NPL 2.959621E-06 1.53 1.59

'- Did not measure

 

Transfer thermometer: Chino thermometer

xi   Chino thermometer output voltage corresponding to the ITS-90 radiance temperature 3000 °C,  submitted by laboratory iLabi , following corrections according to Section 9.2 of the CCT-K10 Final report.

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

  Labi xi ui ui-total
  V °C °C
  NMIJ 3.407657 0.53 0.82
  NIM - - -
  KRISS 3.415004 1.00 1.18
  NRC 3.417717 1.72 1.83
  NIST - - -
  LNE-Cnam - - -
  PTB - - -
  CEM - - -
  NPL 3.420521 1.66 1.77

'- Did not measure

CCT-K10

MEASURAND : Temperature

TEMPERATURE: 1325 °C

 

xi   measurement value submitted by laboratory iLabi

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

 

Co-C and Ni-C cells (linked)

  Labi xi ui ui-total
  °C °C °C
  NMIJ 1324.99 0.08 0.12
  NIM 1324.76 0.12 0.14
  KRISS 1324.84 0.09 0.12
  NRC 1325.09 0.47 0.49
  NIST 1324.49 0.34 0.37
  LNE-Cnam 1324.71 0.06 0.17
  PTB 1324.24 0.16 0.21
  CEM 1324.39 0.20 0.24
  NPL 1324.76 0.16 0.22

 

CCT-K10

MEASURAND : Temperature

TEMPERATURE: 1952 °C

 

xi   measurement value submitted by laboratory iLabi

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

 

Ru-C cells

  Labi xi ui ui-total
  °C °C °C
  NMIJ 1953.31 0.18 0.23
  NIM 1952.98 0.22 0.25
  KRISS 1953.23 0.32 0.34
  NRC 1952.88 0.90 0.91
  NIST 1952.68 0.51 0.53
  LNE-Cnam 1952.88 0.09 0.20
  PTB 1952.85 0.32 0.34
  CEM 1952.29 0.43 0.45
  NPL 1952.96 0.33 0.35

CCT-K10

MEASURAND : Temperature

TEMPERATURE: 2747 °C

 

xi   measurement value submitted by laboratory iLabi

ui   combined laboratory standard uncertainty of xi

ui-total combined standard uncertainty of xincluding components for drift, corrections, and uncertainty of the median value.

 

WC-C cells

  Labi xi ui ui-total
  °C °C °C
  NMIJ 2747.42 0.40 0.45
  NIM 2747.20 0.44 0.48
  KRISS 2747.44 0.80 0.82
  NRC 2747.03 1.73 1.74
  NIST 2746.31 0.89 0.91
  LNE-Cnam 2747.38 0.16 0.36
  PTB - - -
  CEM 2747.59 0.82 0.84
  NPL 2746.79 0.62 0.65

'- Did not measure