CCM.M-K4, SIM.M.M-K4, APMP.M.M-K4.1, EURAMET.M.M-4.2015 and GULFMET.M.M-K4
MEASURAND : Mass
NOMINAL VALUE: 1 kg
Degrees of equivalence represented by Di and its expanded uncertainty Ui (k = 2), both expressed in mg.
CCM.M-K4, SIM.M.M-K4, APMP.M.M-K4, EURAMET.M.M-4.2015 and GULFMET.M.M-K4
MEASURAND : Mass
NOMINAL VALUE: 1 kg
Degrees of equivalence represented by Di and its expanded uncertainty Ui (k =2), both expressed in mg.
 |
 |
 |
 |
 |
 |
| Metrology area, Sub-field | Mass and related quantities, Mass Standards |
| Description | Comparison of mass standards |
| Time of measurements | 2011 - 2012 |
| Status | Approved for equivalence |
| Final Reports of the comparisons | |
| References | |
| Measurand | Mass of 1 kg |
| Transfer device | Eight stainless steel standards |
| Comparison type | Key Comparison |
| Consultative Committee | CCM (Consultative Committee for Mass and Related Quantities) |
| Conducted by | CCM (Consultative Committee for Mass and Related Quantities) |
| Comments | Results published on 24 July 2014 Updated on 25 June 2019 SIM.M.M-K4 and APMP.M.M-K4.1 results are linked to CCM.M-K4 results. Stainless steel 1 kg standards
|
| Pilot institute |
BIPM
Bureau International des Poids et Mesures BIPM - International Organization |
| Contact person | Alain Picard +33 1 45 07 70 28 |
| Pilot laboratory | |
|---|---|
| BIPM |
Bureau International des Poids et Mesures, BIPM - International Organization, N/A |
| BEV |
Bundesamt für Eich- und Vermessungswesen, Austria, EURAMET |
| CEM |
Centro Español de Metrologia, Spain, EURAMET |
| CENAM |
Centro Nacional de Metrologia, Mexico, SIM |
| INRIM |
Istituto Nazionale di Ricerca Metrologica, Italy, EURAMET |
| KRISS |
Korea Research Institute of Standards and Science, Korea, Republic of, APMP |
| LNE |
Laboratoire national de métrologie et d'essais, France, EURAMET |
| METAS |
Federal Institute of Metrology, Switzerland, EURAMET |
| NIM |
National Institute of Metrology, China, APMP |
| NIST |
National Institute of Standards and Technology, United States, SIM |
| NMIA |
National Measurement Institute, Australia, Australia, APMP |
| NMIJ AIST |
National Metrology Institute of Japan, Japan, APMP |
| NMISA |
National Metrology Institute of South Africa, South Africa, AFRIMETS |
| NPL |
National Physical Laboratory, United Kingdom, EURAMET |
| NPLI |
CSIR National Physical Laboratory of India, India, APMP |
| NRC |
National Research Council, Canada, SIM |
| PTB |
Physikalisch-Technische Bundesanstalt, Germany, EURAMET |
This page proposes print-out on A4 paper (portrait) of the comparison details (best printed out using a black and white printer).
Please, select items to be printed out, then click on "OK" :
CCM.M-K4, SIM.M.M-K4, APMP.M.M-K4.1, EURAMET.M.M-4.2015 and GULFMET.M.M-K4
MEASURAND : Mass
NOMINAL VALUE: 1 kg
CCM.M-K4
For each of the travelling mass standards, the key comparison reference value, xR, and its standard uncertainty, uR, were obtained using the generalized linear least-squares method as explained in section VII of the CCM.M-K4 Final Report.
The degree of equivalence of each laboratory i with respect to the reference value is given by a pair of terms:
Di and Ui its expanded uncertainty (k = 2), both expressed in mg.
Detailed information on the evaluation of Di and Ui may be found in section VIII of the Final Report.
There were no degrees of equivalence between pair of laboratories calculated for this comparison.
Linking SIM.M.M-K4 to CCM.M-K4
The results of the SIM.M.M-K4 comparison were linked to CCM.M-K4 via the CENAM and NRC. The linking procedure is described on pages 5 to 7 of the SIM.M.M-K4 Final Report.
Linking APMP.M.M-K4.1 to CCM.M-K4
KRISS participated in both key comparisons, APMP.M.M-K4.1 and CCM.M-K4, providing a link between the NMC, A*STAR result and the key comparison reference value of CCM.M-K4. The linkage process is described in Section 7 of the APMP.M.M-K4.1 Final Report.
Linking EURAMET.M.M-K4.2015 to CCM.M-K4
The results of the EURAMET.M.M-K4.2015 comparison were linked to CCM.M-K4 via the BEV, BIPM, LNE, METAS and NPL. The linkage process is described in Section 7 of the EURAMET.M.M-K4.2015 Final Report.
Linking GULFMET.M.M-K4 to CCM.M-K4
The results of the GULFMET.M.M-K4 comparison were linked to CCM.M-K4 via the INRIM, METAS and KRISS. The linkage process is described in Section 7 of the GULFMET.M.M-K4 Final Report.
CCM.M-K4, SIM.M.M-K4, APMP.M.M-K4.1, EURAMET.M.M-4.2015 and GULFMET.M.M-K4
MEASURAND : Mass
NOMINAL VALUE: 1 kg
CCM.M-K4
The key comparison was organized in four simultaneous “petals”. Each of the four participants within a petal received the same two travelling mass standards as follows:
Petal 1: Mass standards B5 and C1; Petal 2: Mass standards B6 and C2; Petal 3: Mass standards B7 and D1; Petal 4: Mass standards B8 and D2.
The pilot laboratory, the BIPM, carried out a comparison of the standards before the comparison started, and after completion of measurements within each petal.
xi : reported result obtained as the difference between the measurement of the mass standard carried out by laboratory i and its nominal value, and corrected for the drift of the travelling mass standard as explained on page 8 of the Final Report.
ui : combined standard uncertainty of xi
SIM.M.M-K4
The laboratory individual measurement results are given on page 3 of the SIM.M.M-K4 Final Report.
APMP.M.M-K4.1
The results reported by the particpants in APMP.M.M-K4.1 are given in section 6 of the APMP.M.M-K4.1 Final Report.
EURAMET.M.M-K4.2015
The results reported by the particpants in EURAMET.M.M-K4.2015 are given in Table 5 of the EURAMET.M.M-K4.2015 Final Report.
GULMET.M.M-K4
The results reported by the particpants in GULFMET.M.M-K4 are given in Table 5 of the GULFMET.M.M-K4 Final Report.
